Tilbehør blücher

Viser 1–24 af 28 resultaterSorteret efter popularitet

  • Technical drawing of a square recessed bezel with outer width 164 mm and inner opening 155 mm; 10.5 mm depth.
    61 kr inkl. moms
  • Perforated metal sheet with evenly spaced square holes and a circular central cutout, resembling a vent or grate.
    119 kr inkl. moms
  • Technical drawing of a cylindrical pipe with a square mounting flange: side view shows 199 mm total height, Ø110 bore, flange 145 mm wide and 33 mm thick; top view shows square flange with circular bore and corner mounting holes.
    286 kr inkl. moms
  • Ring-shaped gasket with outer diameter Ø102 mm, inner hole Ø87 mm, and 7 mm thickness; shown in a side cross-section with a 3D isometric view.
    14 kr inkl. moms
  • Brushed metal square wall plate with a circular black rotary switch in the center.
    Blændplade square- med skruelås og 1¼" bundventil- rist: 140x140mm- rustfrit stål: AISI304/EN1.4301
    526,25 kr inkl. moms
  • White cylindrical pedestal with a round metal maintenance access cover on top, like a floor cleanout access point in a wall or floor.
    Boligafløb: Overdel uden bærering. Kan anvendes til justerbare afløb, der opfylder et af de følgende krav: vandret udløb, udløb = ø110mm, sideindløb.
    460 kr inkl. moms
  • Metal HVAC duct connector with circular elbow coupling and clamp
    Indskæringsmanchet, ø110mm- sideindløb: ø50mm- rustfrit stål: AISI304/EN1.4301. Benyt hulsavbor dimension 51-53 mm.
    411 kr inkl. moms
  • Technical drawing of a cylindrical duct with a conical section, showing top and bottom openings Ø110 mm, overall height 814 mm, and outlet Ø250 mm; includes side mounting bracket and dimensions for assembly.
    1.700 kr inkl. moms
  • Technical diagram of a cylindrical pedestal with a square diamond-shaped mounting plate on top; plate 145 mm wide, height 199 mm, bottom Ø110 mm, central opening.
    248 kr inkl. moms
  • Square metal drain grate with a grid of square openings for drainage at floor level.
    105 kr inkl. moms
  • Three-view drawing of a circular drain strainer with perforations; diameter 106 mm, height 28 mm, shown from top, side, and bottom perspectives.
    174 kr inkl. moms
  • Technical drawing of a square perforated vent/grille with 140 mm width and 2 mm thickness; includes mounting holes in corners.
    119 kr inkl. moms
  • Metal threaded hose fitting with a black rubber seal on one end (close-up)
    169 kr inkl. moms
  • Stainless steel colander with two handles and perforated sides for draining liquids
    521 kr inkl. moms
  • Floor drain with square frame and perforated grid; side view shows 60 mm height and Ø110 mm outlet area.
    Overdel Square- Uden bærering- Gulv: beton og fliser- Ramme: 145x145mm- Rustfrit stål: AISI304/EN1.4301
    238 kr inkl. moms
  • Round white plastic disc with a shallow horizontal slot across the center and a small embossed circular logo on the top surface
    16 kr inkl. moms
  • Top view: square perforated plate with a grid of small square openings, a circular cutout near the lower-left quadrant, and mounting holes at the four corners. Overall outer size 140 mm; inner dimensions show a 38 mm offset from the left edge to features. Side view indicates plate thickness 2 mm. Circular hole Ø35 is noted. 3D isometric view shows the same perforated plate with a recessed border.
    158 kr inkl. moms
  • Cross-section of a round lid with a double-seal lip: overall length 44 mm, inner opening 38 mm, height 7.6 mm, showing snap-fit ends and gasket cavity; perspective view of the lid below supports the shape.
    Renseprop til boligafløb- til boligafløb 102/202/302- materiale: tpr
    28 kr inkl. moms
  • Close-up of a Blücher stainless steel drainage fitting with a black rubber gasket and green-labeled tag on the body.
    Brandvandlås- vandlukkehøjde = 50mm- syrefast stål: AISI316l/EN1.4404
    717 kr inkl. moms
  • Technical drawing of a cylindrical trash can with a hinged lid and handle; top view shows a Ø50 mounting hole with a bracket and dimensions 109 and 122.
    157 kr inkl. moms
  • Technical drawing of a square mounting plate with a centered circular opening Ø92 mm; outer width 140 mm, 2 mm thick housing.
    Rist Square Copenhagen - Rist: 140x140mm - Rustfrit stål:
    315 kr inkl. moms
  • Chrome pop-up sink drain stopper with rubber seal and white plastic body
    Todelt indbygningsvandlås, lav- vandlukkehøjde = 50mm- rustfrit stål: AISI304/EN1.4301
    356 kr inkl. moms
  • Small clear plastic zip-seal bag with a pink seal containing two small screws and a washer (hardware components).
    Tilbehør til boligafløb. Til beton- og flisegulve.
    kr inkl. moms
  • Circular shower drain cover with perforated top (many small holes), diameter 155 mm; side views show mounting depth and screws/flange.
    Tilbehør til boligafløb. Montagesæt type 620, består af rist, klemring og skruer.
    117 kr inkl. moms