Brøndkarme/tilbehør brøndgods

Viser 25–48 af 67 resultaterSorteret efter popularitet

  • Square-edged drainage grate with a circular pit cover in the center, labeled DUCO, set in a textured grid-patterned concrete surface.
    Duco 425 x 195 mm karm/rist med lås, firkantet, fast, 12,5 t, GG
    Duco firkantet og fast karm/rist med belastningsklasse 12,5 t og lås, vejer minimalt, og sikrer et stærkt produkt i indkørsler, stier osv.
    2.791 kr inkl. moms
  • Circular metal manhole cover set in a square concrete slab, featuring a radial grid pattern and central emblem with rust spots.
    Jemi 425 x 290 mm karm med boltet dæksel, firk., fast, 40 t, GG
    Jemi 425mm firkantet og fast karm med boltet, lugttæt dæksel, belastningsklasse D400, 40 t. En god løsning til især fedtudskillere.
    3.555 kr inkl. moms
  • Square black block with a large circular hole in the center and a hollow cylindrical channel extending downward through the block.
    Ulefos 425 x 300 mm karm med pakning, firkantet, SG UKL/42,5 LS
    Ulefos 425 x 300 mm karm med pakning, firkantet, SG UKL/42,5 LS
    6.920 kr inkl. moms
  • Close-up of a dark gray rubber gasket/ring with raised letters along the outer edge.
    Ulefos 315 x 152 mm karm m/pakn., rund, t/telesk.rør SG UFL/31,5
    Ulefos 315 x 152 mm karm m/pakn., rund, t/telesk.rør SG UFL/31,5
    3.157 kr inkl. moms
  • Top view of a round manhole/access cover with concentric circles and an 'A' at center, mounted on a pipe cap nearby a notch at bottom edge
    Mardam EVO 315/400 mm karm/dæksel, rund, med PVC-skørt, 40 t, SG
    Mardam EVO 315/400 mm karm/dæksel, rund, med PVC-skørt, 40 t, SG
    2.537 kr inkl. moms
  • Round metal manhole cover with a diamond grid pattern and markings MIA, 580/670, A15.
    Mardam 580-670 mm fleksibel karm/dæksel, rund, fast, 1,5 t, SG
    Mardam 580-670 mm fleksibel karm/dæksel, rund, fast, 1,5 t, SG
    2.379 kr inkl. moms
  • Round blue-gray utility access cover with a textured surface and built-in rim handles.
    Duco 600 x 100 mm karm med boltet dæksel, rund, fast, 40 t, SG
    Duco 600 mm rund og fast karm med boltet, lugttæt dæksel, belastningsklasse D400, 40 t. En god løsning til især fedtudskillere.
    5.034 kr inkl. moms
  • Cross-sectional side view of a flat circular part with a recessed central pocket and curved underside; overall outer diameter 598, total height 96, with pocket depths/clearances shown as 34 and 40.
    Duco 600 mm dæksel med pakning, uden lås, 25 t, SG SORT
    Duco 600 mm dæksel med pakning, uden lås, 25 t, SG SORT
    2.405 kr inkl. moms
  • Cross-section of a circular part with Ø320 and a stepped profile; shows vertical dimensions of 20, 28, and 63 mm from the datum.
    Duco 280/315 mm dæksel med pakning og fjederlås, 40 t, SG SORT
    Duco 280/315 mm dæksel med pakning og fjederlås, 40 t, SG SORT
    650 kr inkl. moms
  • Cross-sectional technical drawing of a machined part showing a large circular feature Ø430 and stepped vertical dimensions of 22, 35, and 52 mm, with hatching indicating material in a side view.
    Duco 425 mm dæksel med PUR-pakning og fjederlås, 40 t, SG SORT
    Duco 425 mm dæksel med PUR-pakning og fjederlås, 40 t, SG SORT
    1.879 kr inkl. moms
  • Cross-sectional view of a machined cylindrical part: outer Ø598, stepped shoulders, and a central pocket; overall height 96 mm with 34 mm and 40 mm step dimensions.
    Duco 600 mm dæksel med pakning og fjederlås, 40 t, SG SORT
    Duco 600 mm dæksel med pakning og fjederlås, 40 t, SG SORT
    2.626 kr inkl. moms
  • Cross-section of a flanged cylindrical component with stepped diameters: Ø560 at the top, Ø416 and Ø360 steps, overall height 180 mm, showing a flange and interior cavity.
    Duco 425 x 180 mm karm uden pakning, rund, flydende, SG SORT
    Duco 425 x 180 mm karm uden pakning, rund, flydende, SG SORT
    2.116 kr inkl. moms
  • Cross‑sectional side view of a cylindrical recessed housing with a top flange. Key dimensions shown: outer Ø560, inner passages Ø360 and Ø416, and a total height of 250 with additional vertical features of 19 and 36.
    Duco 425 x 250 mm karm uden pakning, rund, flydende, SG SORT
    Duco 425 x 250 mm karm uden pakning, rund, flydende, SG SORT
    2.600 kr inkl. moms
  • Cross-sectional technical drawing of a hollow cylindrical housing with flanged ends. Outer diameter Ø760, inner bore Ø558 (with a secondary Ø552 dimension shown near the bottom), overall height 275 with a stepped flange detail on both ends. The cross-hatch indicates material, and the section reveals a hollow interior.
    Duco 600 x 275 mm karm uden pakning, rund, flydende, SG SORT
    Duco 600 x 275 mm karm uden pakning, rund, flydende, SG SORT
    3.963 kr inkl. moms
  • Cross-sectional view of a flanged cylindrical part: outer Ø310, inner bore Ø273, top flange 400 mm wide, overall height 180 mm with the bore offset 100/36 mm from top surface.
    Duco 315 x 180 mm karm uden pakning, firkantet, fast, GG SORT
    Duco 315 x 180 mm karm uden pakning, firkantet, fast, GG SORT
    1.899 kr inkl. moms
  • Cross-sectional drawing of a flange housing showing outer Ø450, bore Ø273, and top opening Ø339 with 100 mm overall height
    Duco 315 x 100 mm karm uden pakning, rund, fast, GG SORT
    Duco 315 x 100 mm karm uden pakning, rund, fast, GG SORT
    911 kr inkl. moms
  • Cross-section of a flange-mounted cylindrical housing: outer diameter 310 mm, inner bore 273 mm, overall height 250 mm; top flange and mounting features shown with dimensions 400 mm width, 36 mm and 100 mm depths.
    Duco 315 x 270 mm karm uden pakning, firkantet, fast, GG SORT
    Duco 315 x 270 mm karm uden pakning, firkantet, fast, GG SORT
    2.194 kr inkl. moms
  • Cross-sectional technical drawing of a flange housing: overall width 510 mm, outer diameter Ø416 mm, inner bore Ø360 mm, overall height 180 mm with 100 mm and 80 mm reference offsets, and 36 mm wall thickness at the mounting flanges.
    Duco 425 x 180 mm karm uden pakning, firkantet, fast, GG SORT
    Duco 425 x 180 mm karm uden pakning, firkantet, fast, GG SORT
    2.546 kr inkl. moms
  • Cross-section of a cylindrical housing with stepped diameters: Ø560 outer, Ø448 top bore, Ø360 inner bore, overall height 100 units (dimensions shown).
    Duco 425 x 100 mm karm uden pakning, rund, fast, GG SORT
    Duco 425 x 100 mm karm uden pakning, rund, fast, GG SORT
    1.119 kr inkl. moms
  • Sectional view of a cylindrical housing with outer diameter Ø360 and inner bore Ø416, length 510, overall height 250, featuring a top recess and mounting flange.
    Duco 425 x 250 mm karm uden pakning, firkantet, fast, GG SORT
    Duco 425 x 250 mm karm uden pakning, firkantet, fast, GG SORT
    3.235 kr inkl. moms
  • Cross‑section of a flanged cylindrical housing: outer diameter Ø589, bore Ø552, overall length 690, right flange thickness 41 and overall height 170 with a stepped shoulder at 100.
    Duco 600 x 170 mm karm uden pakning, firkantet, fast, GG SORT
    Duco 600 x 170 mm karm uden pakning, firkantet, fast, GG SORT
    3.544 kr inkl. moms
  • Cross-section of a flange-mounted cylindrical housing: overall diameter 790 mm, inner bore 552 mm, top opening diameter 614 mm, thickness about 160 mm with flanged feet on sides.
    Duco 600 x 160 mm karm uden pakning, rund, fast, GG SORT
    Duco 600 x 160 mm karm uden pakning, rund, fast, GG SORT
    2.838 kr inkl. moms
  • Cross-section of a precision mechanical part: a circular plate Ø430 with stepped internal features and three reference dimensions (22, 35, 52) to the edge.
    Duco 425 mm rist med pakning og fjederlås, 40 t, SG SORT
    Duco 425 mm rist med pakning og fjederlås, 40 t, SG SORT
    1.210 kr inkl. moms
  • Cross-sectional view of a mechanical flange showing outer diameter Ø321, overall height 63, top clearance 20, side height 28, and an internal recess/boss features.
    Duco 280/315 mm dæksel m/PUR-pakning og fjederlås, 40 t, SG SORT
    Duco 280/315 mm dæksel m/PUR-pakning og fjederlås, 40 t, SG SORT
    1.233 kr inkl. moms